Verizon Iphone 4 iOS 4.2.2 Jailbreak Using Sn0wbreeze

Do you have an Iphone 4 running iOS 4.2.2 on the Verizon network and are wanting to jailbreak it? My name is Michael and have been jailbreaking Iphones and taking them to their full limits and potential for over 3 years and have to say that you’ll never enjoy the full capabilities of the Iphone if you don’t jailbreak it.

With customized themes, and free games and apps, there’s no reason to not jailbreak it, considering that jailbreaking your Iphone costs nothing but you time, about 5 minutes at that as the jailbreaking software is free! Yes, you read that right, the jailbreaking software is available at no cost, so what are you waiting for? Continue reading on and we’ll help you through the process and explain some tips and perks to jailbreaking your device.

For this tutorial, we will be using Sn0wbreeze as the jailbreaking software, the download link for this software can be found at http://www.iH8Sn0w.com (0 is a zero, not an o). Once you go to this site, select the appropriate download link and install it onto the computer. Once downloaded and installed, you will need to connect your Iphone to the computer via the USB cable as if you were syncing it with iTunes. One thing I always recommend to jailbreakers is that you back up your Iphone with iTunes so that you can restore you Iphone to its original state which is great because if you have issues with your Iphone after the jailbreaking process has completed, you can restore it meaning that it will be like new right out of the box.

So once your Iphone is connected to your computer via the USB cable, you will need to open up the Sn0wBreeze software and it will ask you to put your Iphone into DFU mode. This is done by holding down the “Power” button and the “Home” button at the same time for exactly ten seconds, once you’re at ten seconds, release the “Power” button while still holding in the “Home” button until you get a notification from Sn0wBreeze saying that it has detected your device in “Recover Mode” (DFU Mode). You will then be prompted with some information on the jailbreaking process and will be able to click “Start”. Once you start the process, the rest of the process is automated and Sn0wBreeze will take care of the rest. Give Sn0wBreeze about 5 minutes to complete the process and when it’s done, you will be notified that it’s safe to disconnect your Iphone.

Once the jailbreaking process is completed, disconnect your Iphone 4 and scroll through the pages on your Iphone until you see the new application installed called “Cydia”. Go into Cydia and go to “Sources”, and then “Manage” and then “Add” and add “Installous” as a source and install it. Once it has finished downloading and installing, go back to your pages and look for that application and open it. You will now be able to download all games and apps for free that are available in the Apple App store as Installous has every App available that’s in the Apple App store. Downloading App from Installous only takes a matter of a couple minutes even if not on wifi and you can even download all of the updates for Apps as well when they come out. You have now successfully jailbroken your Iphone and no longer have to worry about paying for your Apps or Games. We also recommend adding “Winterboard” as one of the sources in Cydia, this will allow you to place all of your downloaded customized themes here from Cydia so your downloads will stay organized in one place.

Tagged As: , , , , , ,

Jailbreak iPod Touch 2G iOS 3.1.1 using Spirit

Do you have an Ipod Touch 2G running iOS 3.1.1? This article and tutorial will help you jailbreak your device using Spirit. Spirit is the jail breaking software that we’re going to use for this tutorial as it’s a stable and reliable jailbreak and will help you to greatly simplify the jailbreaking process. Before jailbreaking your device, we highly recommend that you back up your iPod Touch 2G with Itunes as if you ever have any problems with your iPod Touch 2G after the jail breaking process has completed, backing it up will give you the capability of restoring your iPod Touch 2G to it’s original state as if it were new out of the box. Backing it up will also save all of your music, apps and contacts, as long as it’s on the Itouch at the time of backing it up. Now, let’s get to the tutorial, after all, that’s why you’re reading this.

Step 1

Download the latest Spirit Jailbreak software to your desktop. SpiritJB.com

clip_image002

Step 2

If you are a Windows 7 user, right click on the Spirit.exe icon and select “Properties”. Under the “Compatibility” tab on the Properties window, enable the “Run this program in compatibility mode for” checkbox and select Windows 98/Windows ME from the drop down list.

clip_image004

Once you have done this, click “Apply” and then “Ok” to close the window.

Step 3

You will now be prompted to connect your iPod Touch 2G.

clip_image006

Step 4

Connect your iPod Touch 2G to your computer and click “Jailbreak

clip_image008

Step 5

The Spirit application will now start the jailbreak process. Once done, you will be prompted to “Quit” the application.

clip_image010

Step 6

Press the ‘Quit‘ button. Your iPod Touch 2G will now reboot to show the progress indicator.

clip_image011

Step 8:

Once the process is completed, your iPod Touch 2G should be successfully jail broken. You should also see Cydia application installed on your iPod Touch’s Home Screen. Go into Cydia, go to Sources, and then Manage and then select Add and add “Installous” as a source. Once Installous has been downloaded and installed, exit Cydia and go back to your home screen and you will see that Installous is installed. Installous is the jail broken version of the Apple App store and this is where you will be able to download all of the games and apps for free.

Copyright 2011 WTB.COM.AU

Tagged As: , , , ,

Jailbreak iPhone 3G and 3GS on iOS 4

Do you have an Iphone 3G or 3GS running iOS 4? Many people on different devices running on different versions have problems jail breaking their device; usually because they cant find relevant information explaining to them how to do it.

In this article, we’ll explain to you how you can jail break your Iphone on iOS 4 safely without taking any risks of hurting your device. One thing I always recommend to Iphone owners before jail breaking is backing up their phone with iTunes.

Just in case you have problems with your Iphone after the jail breaking process has completed, this will allow you to revert your Iphone to its original state as if it were new. Restoring it will also keep Apple from being able to see that your Iphone was jail broken which is great as jail breaking or altering your Iphones software voids the warranty on your phone.

Though there are many jail breaking software’s available, I like to use RedSn0w as it has been used by a lot of people and it’s very easy to use. RedSn0w only requires about 10 minutes of time to jail break your Iphone and for the most part, RedSn0w automates the jail breaking process for you. Follow the instructional and the directions closely and you won’t have any problems before or after jail breaking your Iphone.

Step 1

 

The first thing that you need to do is to create a new folder on your desktop and name it Pwnage. To do this, right click on your Desktop and select New Folder, and name the folder Pwnage.

Step 2

 

Next, you need to download RedSn0w from RedSn0w.us and place it in the Pwnage folder.

clip_image002

Step 3

 

Connect your Iphone to the computer and open up iTunes.

clip_image004

Step 4

Once RedSn0w opens click the Browse button
clip_image006

Step Five

 

Select the jail breaking software in your folder and open it.
clip_image008
Step Six

Once the firmware has been verified click the “Next” button to continue.

clip_image010
Step Seven

RedSn0w will now prepare to jail break your device.

Step Eight

From this window you can select the jailbreak options you would like.
clip_image012
Step 9

Once you click “Next” RedSn0w will then begin the jail breaking process and this process is automated, when it’s done, you will be prompted with a message saying that it is completed and that it is safe to disconnect your Iphone.

Copyright 2011 WTB.COM.AU

Tagged As: , , , ,

Jailbreak iPhone 3G, 3GS on iOS 3.2.2 using GreenPo1son

Wanting to jail break your Iphone 3G or 3GS while running iOS 3.2.2? Today I’ll be writing a detailed article and tutorial on how you can jail break your device running this version on your Iphone using GreenPo1son. GreenPo1son (GreenPo1son.com) is a jail breaking software released by the Dev Team, a well known and reputable team of hackers and programmers that have released previous versions of jail breaking software. Green Po1son is a very easy jail breaking software to use and well ensure you a safe and easy jail break. As always, be sure to back up your Iphone with iTunes before jail breaking incase you need to restore your phone back to it’s original state in case you have issues or problems with your Iphone after the jail breaking process is complete, after all, jail breaking your Iphone is altering the Iphones software, functionality and usability, but for the better if done properly. Put in simple terms, jail breaking allows you to download all games and apps for free but most do it to open up and broaden the full capability of the Iphone. With that said, let’s begin.

Step 1

Download the Green Po1son jail breaking software onto your desktop, you can do this by going to http://www.GreenPo1son.com and then click “Downloads” at the top and then select the appropriate download.

Step 2

First, open iTunes and make sure your phone is connected to the computer via the USB cable. Next you need to put your Iphone in DFU mode which is a recovery mode and is required to jail break your device. To put your Iphone in DFU mode, hold down the “Power” button and the “Home” button at the same time for ten seconds, at ten seconds, release the “Power” button while still holding the “Home” button until you get a pop up from iTunes saying that it has detected an Iphone in recovery mode.

Step 3

Start the Green Po1son software by clicking the icon on your desktop. Once the software has opened, you will be able to click “Start” and Green Po1son will take care of the rest of the process for you. Once started, the rest of the process is automated.

Step 4

Once the jail breaking is complete, Green Po1son will notify you that the process is done and that is okay to disconnect your Iphone. Go on your phone and you will notice a new program installed called “Cydia”. Open up Cydia; go to “Sources” and then “Manage”. Once you’re in “Manage”, go to “Add” and put in “Installous” and add it as a source. Installous is the jail broken version of the Apple App store and this is where you will be able to download all of the games and apps you want. If it’s in the Apple App store, it’s on Installous.

Tagged As: , , ,

Jailbreak iPhone 3G, 3GS on iOS 3.3.3 with Spirit

Have an Iphone 3G or an Iphone 3GS running iOS 3.3.3? Today we’ll be bring you another article/tutorial that will help you jail break your Iphone on 3.3.3 safely using Spirit, which is the jail breaking software that you’ll be using to jail break your device. Many tend to worry when jail breaking their device as some of heard stories that others have had their devices become inoperable after they jail broke their but rest assured, if you follow the tutorial and the directions, you will go through the process with ease without having to worry about effecting your device in a way to where it wouldn’t work properly. Spirit has been around for a while and many have had success with it.

Step 1

Download the latest Spirit Jailbreak software to your desktop. SpiritJB.com

clip_image002

Step 2

If you are a Windows 7 user, right click on the Spirit.exe icon and select “Properties”. Under the “Compatibility” tab on the Properties window, enable the “Run this program in compatibility mode for” checkbox and select Windows 98/Windows ME from the drop down list.

clip_image004

Once you have done this, click “Apply” and then “Ok” to close the window.

Step 3

You will now be prompted to connect your iPhone.

clip_image006

Step 4

Connect your iPhone or iPod touch to your computer and click “Jailbreak”

clip_image008

Step 5

The Spirit application will now start the jailbreak process. Once done, you will be prompted to “Quit” the application.

clip_image010

Step 6

Press the ‘Quit‘ button. Your Iphone 3G/Iphone 3Gs will now reboot to show the progress indicator.

clip_image011

Step 8:

Once the process is completed, your iPhone or iPod Touch should be successfully jailbroken. You should also see Cydia application installed on your iPhone or iPod Touch’s Home Screen.

Tagged As: , , ,